Update of Xilinx PowerPC (PPC405) Port
Posted by CHUAN
on April 6, 2012
The demo "Xilinx PowerPC (PPC405) Port" uses functions in "Xilinx Board Support Package" (BSP) as part of its portable ports.
However, some functions are not referenced in the BSP, resulting in the failure in linking.
e.g. XIntc_mGetIntrStatus (seems to be interrupt funciton in BSP)
I guess, the BSP is updated therefore not compitable with the FreeRTOS now
So, which EDK version is FreeRTOS using in this demo?
Thanks in advance
RE: Update of Xilinx PowerPC (PPC405) Port
Posted by Richard
on April 7, 2012
I can't remember, but I think it was version 6 or 9, not that that helps you much. Both Xilinx PowerPC ports are not going to be updated again, as Xilinx are not updating their PPC products. The Xilinx MicroBlaze port and demo have both recently been updated to the latest (13?) ISE version, and there is a new Xilinx Zynq port as these are the two Xilinx lines being actively developed.
Copyright (C) 2004-2010 Richard Barry. Copyright (C) 2010-2016 Real Time Engineers Ltd.
Any and all data, files, source code, html content and documentation included in the FreeRTOSTM distribution or available on this site are the exclusive property of Real Time Engineers Ltd..
See the files license.txt (included in the distribution) and this copyright notice for more information. FreeRTOSTM and FreeRTOS.orgTM are trade marks of Real Time Engineers Ltd.