sam3s-ek+gcc(atmel studio 6) example....
Posted by https://www.google.com/accounts on August 30, 2012
I' m trying to get freertos running on my sam3s-ek using atmel studio. This far I only have been partly successful.
What happens is that my applications get serviced only a few times. Then the sw hangs somewhere. The problem is there both during debug and normal execution. Though servicing of the app might work a little longer in debug with breakpoints.
I'm using freertos 7.2.0 and the ARM-CM3 port.
Is there anyone else that have seen such behaviour or have any ideas for a solution?
RE: sam3s-ek+gcc(atmel studio 6) example....
Posted by Richard
on August 30, 2012
FreeRTOS V7.2.0 has a project for the SAM4S-EK using Atmel Studio 6 under FreeRTOS/Demo/CORTEX_M4_ATSAM4S_Atmel_Studio. As this part does not have an FPU the project is set up to use the Cortex-M3 FreeRTOS port (rather than the Cortex-M4F port).
If you checkout the latest SVN head revision from SourceForge you will also find SAM3X-EK and SAM3S-EK2 projects, both using Studio 6, in the FreeRTOS/Demo/CORTEX_ATSAM3X_Atmel_Studio and FreeRTOS/Demo/CORTEX_ATSAM3S-EK2_Atmel_Studio directories respectively. You can use the instructions on the SAM4S-EK documentation page to run these demos too (just use the files in the correct directory) http://www.freertos.org/Atmel_SAM4_SAM4S-EK_RTOS_Demo.html
Copyright (C) 2004-2010 Richard Barry. Copyright (C) 2010-2016 Real Time Engineers Ltd.
Any and all data, files, source code, html content and documentation included in the FreeRTOSTM distribution or available on this site are the exclusive property of Real Time Engineers Ltd..
See the files license.txt (included in the distribution) and this copyright notice for more information. FreeRTOSTM and FreeRTOS.orgTM are trade marks of Real Time Engineers Ltd.