Luminary UIP+Eclipse demo hanging

Hi Guys, I am trying the FreeRTOS Luminary port demo with uIP + Eclipse, using my LM3S6965 board from Luminary. Installed Eclipse Version: 3.4.1 Build id: M20080911-1700 Sourcery G++ lite (4.3.2), and changed the paths in Eclipse projet to reflect the correct directories (in the zip file it pointed to C:devtoolsSoucery….) Compiled it OK, and flashed it with Luminary flash utility (could not use OpenOCD yet because it asked for Cygwin.dll or something like it that I do not have). It worked. Except on the io.shtml page… when I click on the "UPDATE IO" button, the state of the LED is updated but the application HANGS without any message. Evertthing stops, even pings stopped working. I only changed the IP address in the original source code. Any suggestion on where to look for the problem? THanks Sergio P. Sider

Luminary UIP+Eclipse demo hanging

I dont know if it works with all browsers. Had problems with some and not all.

Luminary UIP+Eclipse demo hanging

Hi again… I found the problem. I had the CodeSourcery for Stellaris version (not the Lite one), and at first, I changed the Makefile to use it (arm-stellaris-eabi instead of arm-none-eabi) Now, when I change it back to arm-none-eabi it worked! I thought it should work… maybe my version is broken (not the last one)… It may explain why I have strange crashes sometimes in other applications… ;-) Thanks anyway! Sergio. PS. Jitter is 160ns using arm-none-eabi , and was 140ns using arm-stellaris-eabi… is it a clue ?