Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Real time embedded FreeRTOS mailing list 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT Training




Loading

selected processor does not support

Posted by Nobody/Anonymous on January 4, 2007
i what to make free rtos soft with using interupt but i have strange complilation erorr :

C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:121: Error: selected processor does not support `stmdb SP!,{R0}'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:122: Error: selected processor does not support `stmdb SP,{SP}^'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:125: Error: lo register required -- `ldmia SP!,{R0}'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:126: Error: selected processor does not support `stmdb R0!,{LR}'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:128: Error: lo register required -- `ldmia SP!,{R0}'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:129: Error: selected processor does not support `stmdb LR,{R0-LR}^'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:131: Error: lo register required -- `sub LR,LR,#60'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:132: Error: selected processor does not support `mrs R0,SPSR'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:133: Error: selected processor does not support `stmdb LR!,{R0}'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:136: Error: selected processor does not support `stmdb LR!,{R0}'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:139: Error: lo register required -- `str LR,[R0]'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:146: Error: lo register required -- `sub R11,LR,#4'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:180: Error: lo register required -- `ldr LR,[R0]'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:182: Error: lo register required -- `ldmfd LR!,{R1}'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:184: Error: lo register required -- `ldmfd LR!,{R0}'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:185: Error: selected processor does not support `msr SPSR,R0'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:186: Error: Thumb load/store multiple does not support {reglist}^ -- `ldmfd LR,{R0-R14}^'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:188: Error: lo register required -- `ldr LR,[LR,#+60]'
C:\DOCUME~1\Tomasz\USTAWI~1\Temp/ccOqaaaa.s:189: Error: instruction not supported in Thumb16 mode -- `subs PC,LR,#4'


my soft code :


#include <stdlib.h>
#include <stdio.h>

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
#include "lib_AT91SAM7S256.h"

#include "Board.h"

static void task_1( void *pvParameters );
static void task_2( void *pvParameters );
void timer0_c_irq_handler(void) __attribute__ ((naked));
void timer_init ( void );

#define TC_CLKS 0x7
#define TC_CLKS_MCK2 0x0
#define TC_CLKS_MCK8 0x1
#define TC_CLKS_MCK32 0x2
#define TC_CLKS_MCK128 0x3
#define TC_CLKS_MCK1024 0x4


int main( void )
{
AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_PIOA; //rejest dopuszczaja zegar do peryferi
AT91F_PIO_CfgOutput( AT91C_BASE_PIOA, LED_MASK );
timer_init ();
xTaskCreate( task_1, ( const signed portCHAR * const ) "LED1", configMINIMAL_STACK_SIZE, ( void * ) NULL,tskIDLE_PRIORITY + 3 , ( xTaskHandle * ) NULL ); //utozenie wontka
// xTaskCreate( task_2, ( const signed portCHAR * const ) "LED2", configMINIMAL_STACK_SIZE, ( void * ) NULL,tskIDLE_PRIORITY + 3 , ( xTaskHandle * ) NULL ); //utozenie wontka
vTaskStartScheduler(); //start system
return 0;
}
/*-----------------------------------------------------------*/


void timer0_c_irq_handler(void)
{
portENTER_SWITCHING_ISR();
portBASE_TYPE xSwitchRequired = pdFALSE;
AT91PS_TC TC_pt = AT91C_BASE_TC0;
unsigned int dummy;
//* Acknowledge interrupt status
dummy = TC_pt->TC_SR;
//* Suppress warning variable "dummy" was set but never used
dummy = dummy;

//* Read the output state
if ( (AT91F_PIO_GetInput(AT91C_BASE_PIOA) & LED1 ) == LED1 )
{
AT91F_PIO_ClearOutput( AT91C_BASE_PIOA, LED1 );
}
else
{
AT91F_PIO_SetOutput( AT91C_BASE_PIOA, LED1 );
}
*AT91C_AIC_EOICR = 0; // kasujemy flage przerwania
portEXIT_SWITCHING_ISR( xSwitchRequired );
}



static void task_2( void *pvParameters )
{
while(1) {
vTaskDelay(portTICK_RATE_MS*200);
if ((AT91F_PIO_GetInput(AT91C_BASE_PIOA) & LED1 ) == LED1 )
{AT91F_PIO_ClearOutput( AT91C_BASE_PIOA, LED1 ); }
else {AT91F_PIO_SetOutput( AT91C_BASE_PIOA, LED1 );}

}
}





static void task_1( void *pvParameters )
{
while(1) {
vTaskDelay(portTICK_RATE_MS*500);
if ( (AT91F_PIO_GetInput(AT91C_BASE_PIOA) & LED3 ) == LED3 )
{AT91F_PIO_ClearOutput( AT91C_BASE_PIOA, LED3 ); }
else {AT91F_PIO_SetOutput( AT91C_BASE_PIOA, LED3 );}

}
}

void AT91F_TC_Open ( AT91PS_TC TC_pt, unsigned int Mode, unsigned int TimerId)
//* Begin
{
unsigned int dummy;

//* First, enable the clock of the TIMER
AT91F_PMC_EnablePeriphClock ( AT91C_BASE_PMC, 1<< TimerId ) ;

//* Disable the clock and the interrupts
TC_pt->TC_CCR = AT91C_TC_CLKDIS ;
TC_pt->TC_IDR = 0xFFFFFFFF ;

//* Clear status bit
dummy = TC_pt->TC_SR;
//* Suppress warning variable "dummy" was set but never used
dummy = dummy;
//* Set the Mode of the Timer Counter
TC_pt->TC_CMR = Mode ;

//* Enable the clock
TC_pt->TC_CCR = AT91C_TC_CLKEN ;
//* End
}

void timer_init ( void )
{
portENTER_CRITICAL();
//* Open timer0
AT91F_TC_Open(AT91C_BASE_TC0,TC_CLKS_MCK8,AT91C_ID_TC0);
//* Open Timer 0 interrupt
//AT91F_AIC_ConfigureIt ( AT91C_BASE_AIC, AT91C_ID_TC0, 4,AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL, timer0_c_irq_handler);
AT91C_BASE_TC0->TC_IER = AT91C_TC_CPCS; // IRQ enable CPC
// AT91F_AIC_EnableIt (AT91C_BASE_AIC, AT91C_ID_TC0);
AT91C_BASE_AIC->AIC_IECR = 0x1 << AT91C_ID_TC0;
//* Start timer0
AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG ;
portEXIT_CRITICAL();
//* End
}



RE: selected processor does not support

Posted by Nobody/Anonymous on January 8, 2007
Don't know but maybe you are attempting to compile ARM mode code when the compiler is set to THUMB mode?


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) 2004-2010 Richard Barry. Copyright (C) 2010-2016 Real Time Engineers Ltd.
Any and all data, files, source code, html content and documentation included in the FreeRTOSTM distribution or available on this site are the exclusive property of Real Time Engineers Ltd.. See the files license.txt (included in the distribution) and this copyright notice for more information. FreeRTOSTM and FreeRTOS.orgTM are trade marks of Real Time Engineers Ltd.

Latest News:

FreeRTOS V9.0.0 is now available for download.


Free TCP/IP and file system demos for the RTOS


Sponsored Links

⇓ Now With No Code Size Limit! ⇓
⇑ Free Download Without Registering ⇑


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

Renesas Electronics Gold Alliance RTOS Partner.jpg

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

Atmel RTOS partner supporting ARM Cortex-M3 and AVR32 microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Xilinx Microblaze and Zynq partner

Silicon Labs low power RTOS partner

Altera RTOS partner for Nios II and Cortex-A9 SoC

Freescale Alliance RTOS Member supporting ARM and ColdFire microcontrollers

Infineon ARM Cortex-M microcontrollers

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

Cypress RTOS partner supporting ARM Cortex-M3

Fujitsu RTOS partner supporting ARM Cortex-M3 and FM3

Microsemi (previously Actel) RTOS partner supporting ARM Cortex-M3

Atollic Partner

IAR Partner

Keil ARM Partner

Embedded Artists