Luminary Cortex M3 Port for Eclipse - FreeRTOS

Quality RTOS & Embedded Software

Download FreeRTOS
Menu

NOTE:This is a read only archive of threads posted to the FreeRTOS support forum. Use these archive pages to search previous posts. New forum support threads can be started at the FreeRTOS forums.

FreeRTOS Support Archive

The FreeRTOS support forum can be used for active support both from Amazon Web Services and the community. In return for using our software for free, we request you play fair and do your bit to help others! Sign up for an account and receive notifications of new support topics then help where you can.

This is a read only archive of threads posted to the FreeRTOS support forum. Use these archive pages to search previous posts. New forum support threads can be started at the FreeRTOS forums.

[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [April 2008 Threads]

Luminary Cortex M3 Port for Eclipse

Posted by pirate959 on April 1, 2008

I am trying to get he Luminary port working with Eclipse. I have the Luminary CAN and Ethernet Demo Kit. My problem is getting the OpenOCD to work. I go to the http://www.yagarto.de/ website to download OpenOCD, but it says that the Cortex M3 is not supported. However FreeRTOS has a port using this. Is there another location that i should be going for this?

Luminary Cortex M3 Port for Eclipse

Posted by richardbarry on April 1, 2008

Follow the instructions on the relevant port page – http://www.freertos.org/portLM3Sxxxx_Eclipse.html. Info is provided on all the tools that is required. Also, OpenOCD is included in the FreeRTOS.org download. Regards.

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.