Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


No context switch using MPSIM on pic32

Posted by rammbhat on April 13, 2011
hey guys
Id used freertos to create a couple tasks earlier and run it on pic32mx starter kit.. It ran fine.. When i run it on the mplab sim tool, context switch does not occur.. Two processes a and b are present of the highest priority.. Im incrementing a counter in each.. Only one counter gets incremented.. Im using the official pic32 port..

RE: No context switch using MPSIM on pic32

Posted by Richard on April 13, 2011
The PIC32 port was written some time ago. I know, at that time, it could not be simulated in the PIC32 simulator as the simulator did not simulate everything. As I say, that was some time ago, so I don't know if this is still the case.


RE: No context switch using MPSIM on pic32

Posted by rammbhat on April 16, 2011
I can confirm that it still doesnt support mpsim.. works fine on the kit

[ Back to the top ]    [ About FreeRTOS ]    [ Privacy ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS v10.2.0 is available for immediate download. MIT licensed, and including RISC-V and ARMv8-M (Cortex-M33) demos.

NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.

View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.


FreeRTOS and other embedded software careers at AWS.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

Cadence Tensilica Cortes

Espressif ESP32

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers





STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS

Xilinx Microblaze and Zynq partner