Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

FreeRTOS port for ARM Cortex-R5F with GHS compiler

Posted by rammohankn on April 6, 2016

Has anybody tried porting FreeRTOS for ARM Cortex-R5F with GHS ARM Compilers ?


FreeRTOS port for ARM Cortex-R5F with GHS compiler

Posted by rtel on April 6, 2016

I'm not aware of any I'm afraid, but it is just another compiler, so I can't imagine it would be too much different to the other compilers supported. Normally it will only be the assembler syntax, and perhaps some function qualifiers, that will differ between compilers.


FreeRTOS port for ARM Cortex-R5F with GHS compiler

Posted by rammohankn on April 7, 2016

Starting everything from scratch would obviously consume time, was wondering if any one has already tried ARM-Cortex R5F with GHS


FreeRTOS port for ARM Cortex-R5F with GHS compiler

Posted by westmorelandeng on April 7, 2016

Hello Rammohan,

I am not sure you'd have to start from scratch - there are some ports with other compilers for the R4F - I would start with those. There is also some code in the user contributed code on the web-site that could be worth looking at.

Like mentioned before - the usual 'worst' issues when a similar port exists are:

pragmas assembly directives (and sometimes differences in assembler syntax - speaking of ARM here) stack frame(s) - how are certain args pushed/popped - there could be some differences here - and also what are the architectural differences between the R4F and R5F. You'd have to include those; if any.

The specific files to look at are (usually) in portableyour-compilerport.c, portASM.asm, and portmacro.h.

You should start with one of the ports and give it a try - probably won't be too bad or take too long.

Regards, John W.


FreeRTOS port for ARM Cortex-R5F with GHS compiler

Posted by rammohankn on April 7, 2016

Yes I was looking at R4F ports, which will be my starting point.


FreeRTOS port for ARM Cortex-R5F with GHS compiler

Posted by rtel on April 7, 2016

I would recommend looking at the files in the FreeRTOSSourceportableGCCARM_CR5 directory.

The port.c file there should require very few changed: ~~~~ attribute(( used )) is used in a couple of placed to prevent the linker removing symbols that are used in the asm code.

__asm volatile () is also used. __asm is supported by most compilers, but you might need to remove the 'volatile'. ~~~~

The portASM.S file in that directory will no doubt need some translating to use the GH syntax, but the asm instructions themselves can remain.


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS