Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


freeRTOS & System separate from application

Posted by Nobody/Anonymous on August 31, 2006
i would like to have a minimal system running with the RTOS. the system would field messages over uart and/or can. it would have the ability to write application code to flash. and then start the application, and all the pieces would run concurrently.

i want the application to use features of freeRTOS and system. and also would like to compile teh application separately from the RTOS & system.

what would be a useful minimal interface set to the RTOS? maybe all the defs in task.h?

what would be a good way to interface to the RTOS? i was thinking of using SWI. in the portmacro.h i am using it is already used:
#define portYIELD() asm ( "SWI 0" )
but i don't think it would be too hard to add a hook for swi >0

[ Back to the top ]    [ About FreeRTOS ]    [ Privacy ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS v10.2.0 is available for immediate download. MIT licensed, and including RISC-V and ARMv8-M (Cortex-M33) demos.

NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.

View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.


FreeRTOS and other embedded software careers at AWS.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

Cadence Tensilica Cortes

Espressif ESP32

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers





STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS

Xilinx Microblaze and Zynq partner