Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

Re: [freertos:discussion] Too much time between xSemaphoreGiveFromISR and xSemaphoreTake()

Posted by rtel on August 5, 2014

Timer callbacks execute in the timer service task, which is scheduled just like any other task. Do you have the priority of the task set higher than the application tasks so it runs immediately?

-------- Original message --------
From: sminder sminder@users.sf.net
Date:05/08/2014 14:32 (GMT+00:00)
To: "[freertos:discussion]" <382005@discussion.freertos.p.re.sf.net>
Subject: [freertos:discussion] Too much time between xSemaphoreGiveFromISR and xSemaphoreTake()
I rejoiced too soon. I use the xTimerResetFromISR() function in my interrupt subroutine for restarting my software timer. After a start of device it looks like good, but if I use this function again the time between call of the xTimerResetFromISR() and the first triggering of the software timer differ times from time. I use the portENDSWITCHINGISR(false) function in the end of the interrupt subroutine.

Too much time between xSemaphoreGiveFromISR and xSemaphoreTake()

Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/freertos/discussion/382005/

To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS