Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

uxQueueNumber not initialized

Posted by ammaree on August 23, 2015

I am using FreeRTOS v8.2.2 and in my process of building a set of trace macros and routines I have discovered that pxNewQueue->uxQueueNumber is not initialized to a known value (0) in xQueueGenericCreate() around line 375.

The problem showed itself when the traceQUEUE_CREATE() is called immediately afterwards and, expecting the uxQueueNumber to be 0 it returns random values.

Is this a bug or is there some reason behind it?

On a related topic, I also cannot find any functionality to retrieve the queue name from the registry. Any suggestions ?

Andre


uxQueueNumber not initialized

Posted by rtel on August 23, 2015

It is an interesting point you raise:

uxQueueNumber is provided purely for use by trace tools, and thus far has been set by the trace code, rather than the RTOS code. You can see the definition of TRACESETOBJECT_NUMBER in FreeRTOS-PlusSourceFreeRTOS-Plus-TraceIncludetrcKernelPort.h. However, perhaps it should be initialised to something - althoug just initialising it to 0 is not going to be helpful and initialising it to anything else might not be correct for whichever library is providing the trace macros.

Regards.


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS