Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

Using MSP430F149

Posted by Nobody/Anonymous on December 30, 2004
I am using MSP430 port of FreeRTOSV2.5.4 for my applications. But instead of msp430F449 microcontroller, I am using msp430F149. Can I still use the same files or do I need to make some specific changes?

RE: Using MSP430F149

Posted by Richard on December 30, 2004
Hi,

I think the 449 and 149 are basically the same component with and without the LCD controller. If this is the case then changes will be minimal as the peripherals used by the kernel will be the same (basically the timer to generate the ticks).

The demo program as downloaded initialises the LCD controller, so if you have a component that does not have the LCD then you will need to modify the hardware setup routine called from the top of main(). You would of coarse need to do this anyway to configure the device for your own application.

Make sure to read the port documentation on the WEB site along with the Configuration section of the API documentation.

Best regards.


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS