Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


STR9 and uIP

Posted by Nobody/Anonymous on December 3, 2006

I was just looking at code for STR9 and uIP with freertos. However, I noticed that no uip_arp_init() is called, but arp functions are called. In uIP demo with Rowley uip_arp_init is called just after uip_init.

I don't have any board to test this but anyway, do you have any comments on this?

RE: STR9 and uIP

Posted by Nobody/Anonymous on December 3, 2006
uip_arp_init just sets the arp table to zeros. As the arp table is a static memory address the C start up code should do this anyway, so it probably makes no difference if the function is called or not, although for consistency, clarity and portability I would prefer to see it called explicitly.

[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

Meet us at Embedded World. Hall 3A-525.

Hear from Richard Barry at Embedded World. Feb 28, 16:00, Hall 4-428.

Video: Watch James Gosling & Richard Barry at re:Invent, Las Vegas 2017.

FreeRTOS kernel V10.0.1 is available for immediate download. Now MIT licensed.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS