Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


ColdFire Ethernet with LWIP and FreeRTOS

Posted by Francois Bouchard on February 3, 2009
I've ported the demo LWIP_MCF5235_GCC to the MCF5282 with CodeWarrior as the C compiler. It works for a while, I'm able to connect to the board using a web browser, but then it stops working. I can't stay connected for more than 1 or 2 minutes.

I noticed that once it crashed, the task are still running (I removed the vErrorChecks task) which is good, but the ISR (triggered by incoming frame) isn't triggered anymore.

I boosted rx task priority level,
Boosted ISR level and priority,
looked for wrong data in the Ethernet Controller registers.

Any clues on what could cause the ISR to stop working?

Thank you


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

Meet us at Embedded World. Hall 3A-525.

Hear from Richard Barry at Embedded World. Feb 28, 16:00, Hall 4-428.

Video: Watch James Gosling & Richard Barry at re:Invent, Las Vegas 2017.

FreeRTOS kernel V10.0.1 is available for immediate download. Now MIT licensed.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS