Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT


Use updated LIbs / Drivers for Luminary Board

Posted by *anonymous on February 7, 2011

I am using a Luminary Micro LM3S811 for a student design project and I wish to use the latest Stellarisware / Keil driverlib libraries.  How can I link the FreeRTOS demo to these files or how can I replace the files included with the FreeRTOS demo?

FreeRTOSV6.1.1DemoCORTEX_LM3S811_KEILLuminaryCode seems to contain the Luminary code, but
FreeRTOSV6.1.1DemoCommondriversLuminaryMicro also seems to contain libraries.
Which, or both, of these do I need to replace and how do I need to structure my directories to maintain a correct compilation scheme?

Many thanks for any assistance.

Use updated LIbs / Drivers for Luminary Board

Posted by davedoors on February 8, 2011

Those demos are quite old now. The best thing to do is open up the existing project, see which driver files it is referencing (which are included in the build, which libraries it is referencing) and just replace those. I suspect it will only use a very small subset of the library files.

[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS