Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

uIP configuration

Posted by bones23 on January 30, 2008
I am using freeRTOS on the STR91x. I am trying to configure the uIP server provided with it. I have found where the IP address is configured but can not find where it configures its subnet or gateway addresses. Does anybody know where this is done?

RE: uIP configuration

Posted by Richard on January 30, 2008
I'm not sure if the current configuration is actually correct, it does not look right. The original demo used DHCP, so UIP_FIXEDADDR is set to 0 in uipopt.h, so the netmask is not fixed.

There are some comments above the definition of UIP_FIXEDADDR regarding changing this. Also you can look at some of the other uIP demos to see how the net mask should be set.

Regards.


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS