Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


Error when using Openocd in freertos tutorial

Posted by hawkhawk on January 28, 2012

I am following the steps in the following tutorial:

I arrived at launching the external tool: "OpenOCD Programmer", but I am having the following problem in the console:

Info: openocd.c:84 main(): Open On-Chip Debugger (2006-11-22 14:00 CEST)
Error: ft2232.c:164 ft2232_write(): FT_Write returned: 4
Error: ft2232.c:346 ft2232_send_and_recv(): couldn't write MPSSE commands to FT2232

Knowing that the drivers are properly configured in windows, how can I proceed to identify the source of the problem?


RE: Error when using Openocd in freertos tutorial

Posted by hawkhawk on January 28, 2012
Well, it worked.

The board was powered from a USB hub without mains power, which lead to the inability to write anything to it.

[ Back to the top ]    [ About FreeRTOS ]    [ Privacy ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.

Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.

View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.


FreeRTOS and other embedded software careers at AWS.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

Espressif ESP32

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers


STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS

Xilinx Microblaze and Zynq partner