Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

Kinetis + GCC port

Posted by vespaman2 on January 27, 2014

I'm about to start a project using GCC for the Kinetis family (K10, but I think the variants are quite similar), and I thought I should ask, if someone had already done a port, and wouldn't mind sharing.

I'm new to the arm family, so any startup help is much appreciated..

Micael


Kinetis + GCC port

Posted by rtel on January 28, 2014

My original reply to this disappeared when I clicked Post, so I hope this doesn't turn up twice now...

You don't need to create a port, just create a project that uses the existing Cortex-Mx port.

If your part has a floating point unit, and you are going to enable the floating point unit then include the FreeRTOS port files from FreeRTOS/Source/portable/GCC/ARM_CM4F in your project.

If you part does not have a floating point unit, or it does have a floating point unit but the floating point unit will not be enabled, then include the FreeRTOS port files from FreeRTOS/Source/portable/GCC/ARM_CM3 in your project.

http://www.freertos.org/porting-a-freertos-demo-to-different-hardware.html http://www.freertos.org/Creating-a-new-FreeRTOS-project.html

Regards.


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS