Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

Where is uip GCC SAM7X demo?

Posted by John Q. Publick on July 27, 2006
In April there was a lot of discussion regarding work on a uip GCC port for the sam7x. What happened to this?

Thanks

- Joe

RE: Where is uip GCC SAM7X demo?

Posted by Richard on July 27, 2006
In short, not sure. The longer answer is:

There is a GCC port for the SAM7X that uses lwIP. It would not be a difficult job to take out the lwIP source and add the uIP source, as you can use the uIP/IAR source code as a base to see which files you need to include.

I also have some other GCC SAM7X ports that don't have uIP in them but are more optimised for code size. These were sent to me from a third party so cannot support them directly (although obviously I will help where I can). If you want a copy then let me know.

Can you send me a link to the April thread so I know which you are referring to and can refresh my memory of what was said and/or done.

Regards.

RE: Where is uip GCC SAM7X demo?

Posted by John Q. Publick on July 28, 2006
Here are the two threads from April:

http://sourceforge.net/forum/message.php?msg_id=3700971
http://sourceforge.net/forum/message.php?msg_id=3703497

- Joe


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS