Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

Running on Xilinx as Simulation

Posted by Nobody/Anonymous on June 12, 2006
As I have no hardware, is it possible to run a multi-tasking application based on FreeRTOS with Microblaze in Simulation mode?

Thanks,
_OuzO_

RE: Running on Xilinx as Simulation

Posted by John W. on June 13, 2006
OuzO,

I'm not sure if IAR has a simulator or not for this - but it's worth checking. The MSP430 simulator they have is pretty good - I've used it on numerous occasions.

Look on www.iar.se .


Regards,
John W.

RE: Running on Xilinx as Simulation

Posted by Nobody/Anonymous on June 13, 2006
You should normally be able to run FreeRTOS in a simulator just as any other program, but only to a point. How far you get depends on what exactly is simulated. Most simulators will simulate the processor core but not the peripherals. This means the timer tick will not execute in the simulator. As the Xilinx simulator is primarily a hardware simulator you might be lucky.


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS