Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

FreeRTOS directory Structure

Posted by Michael James on June 3, 2008
Hi,

I am using FreeRTOS in my latest project and it works very well.

Is it possible under the terms of the license to take out the required files from the directory structure and put them into my project directory structure? It would save me from having to store 16MB of demo files in CVS :-)

I also use PC-Lint to check my code - can I make the required changes to the FreeRTOS code to make it pass Lint? Do I then mail the changes to Richard Barry for inspection/inclusion into the main source trunk?

Regards, Mike.

RE: FreeRTOS directory Structure

Posted by Dave on June 3, 2008
Removing unused source files is definitely not a problem. I will leave it up to Richard to answer the other point in case my interpretation is wrong.

RE: FreeRTOS directory Structure

Posted by Richard on June 3, 2008
If you just make changes to lint the code, without adding any improvements or enhancements, then personally I don't mind if you send me the changes or not. However, if your changes will end up in a commercial product then I would recommend sending the changes anyway, that way you can remove any doubt as to the license compliance.

Regards.


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS