Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


Porting FreeRTOS from Freescale Coldfire V2 to V4 MPU (MCF5445x)

Posted by sanchit17 on June 26, 2015

I downloaded the FreeRTOS (V8.2.1)for Coldfire V2 controllers and compiled that on eclipse. Now I have to port Coldfire V2 to V4 using FreeRTOS.

So, I have few questions regarding this: 1.) What are the differences in V2 and V4? 2.) What changes I need to make to port from V2 to V4? 3.) What things I need to consider while porting?

Please help me out on this. Thanks in advance!!!

Porting FreeRTOS from Freescale Coldfire V2 to V4 MPU (MCF5445x)

Posted by rtel on June 26, 2015

Sorry - having never ported to a V4 I don't know and you may be better off asking on a hardware forum. I would guess the V4 will be a super set of the V2, so it will be a matter of adding to the V2 port rather than changing too much.


[ Back to the top ]    [ About FreeRTOS ]    [ Privacy ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.

Meet Richard Barry and learn about running FreeRTOS on RISC-V at FOSDEM 2019

Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.

View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.


FreeRTOS and other embedded software careers at AWS.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

Espressif ESP32

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers


STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS

Xilinx Microblaze and Zynq partner