Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

Strange DHCP behaviour on high InterfaceInitialise timeout

Posted by miclam on June 22, 2017

Hello,

during testing with my three Interfaces (Ethernet, Powerline, Bridge) I found a strange behaviour of the DHCP which I found hard to figure out.

What happend, was that I did not connect a Cable to my Eth Interface, thus the PHY Autonegotiation failed. But it's timeout was set to 5s, whereas the IP stack sends NetworkDown Events every 3 seconds (for all interfaces). So multiple DHCP requests where send and the Transaction ID always missmatched.

Maybe it's noteworthy that the NetworkInterfaceInitialise methods should finish in <1s, especially with multiple interfaces.

Regards, Michael


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS