I am trying to port FreeRTOS on zedboard but facing problems.
Uptill now I have tried the following but could’nt get blinking LED demo or other demo to debug/run.
- I have downloaded FreeRTOS v10.2.1. Followed the https://www.freertos.org/RTOS-Xilinx-Zynq.html . Import the project in SDK 2017.4. But when I start Debug, Assembling language file appears, but no breakpoint in C file appears. SELECTED_APPLICATION is set to 0 in main() for bliniking demo but no LED is bliniking on ZEDboard.
- I changed the BSP to Zedboard bsp but again no blinking LED on Zedboard.
- I followed https://www.freertos.org/RTOS-Xilinx-SDK-BSP.html but again cant see any LED blinking on the board.
- I made a Vivado (2017.4) Design with AXI Timer and AXI GPIO for LEDs and Switches, make the bitstream, export the hardware to SDK 2017.4. Used my designed Hwplateform for BSP. Import project RTOSDemo from downloaed zip file and used CORTEXA9ZynqZC702 (just as I did in para 1) but again unable to run blinking demo.
All the settings in Debug configuration are correct (Init_ps7.tcl or Resetting entire system or .Elf selection).
Kindly if anyone can help me to correctly port FreeRTOS in ZEDboard, I’ll be thankful.