Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

How to handle NMI ?

Posted by Nobody/Anonymous on March 6, 2006
I am working on the new port for Z80180 (banked code). As you know Z80 has NMI interrupt. I am not sure how can I use this type of interrupt with FreeRTOS? I must service this interrupt and can not block it!

RE: How to handle NMI ?

Posted by Nobody/Anonymous on March 6, 2006
Can you look at the Z80 demo available from the FreeRTOS site? Or is it too different?

RE: How to handle NMI ?

Posted by Nobody/Anonymous on March 6, 2006
There is no NMI example in the FreeRTOS distribution. Generaly I would like to use this interrupt the same way like standard INT, but it looks that critical sections will not work correctly with NMI. Because of that I can not post any message using xQueueSendFromISR(...) function. How to solve this problem?

RE: How to handle NMI ?

Posted by Nobody/Anonymous on March 6, 2006
It depends how you want to use the NMI. If it does not interfere with the scheduler data structures then it can be used to interrupt the scheduler with no problem.

I don't know the Z80 - can the other interrupts be prioritised to get the same effect you want.


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS