Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

CoRoutine and Task communication possible?

Posted by Akos on March 14, 2011
Hello!

Why isn't it possible to pass data between a coroutine and a task? Perhaps using a queue?
Also, even regarding that there is a reason for it that I do not yet understand, why wouldn't we be able to use the ISR routines from the CoRoutines? The only obstacle is that any called function may not block (because of the shared stack), but the ISR funcitons never block, so they could theoretically be used from the coroutine environment.

And my other solution would be to define an svc (on cortex-m3 for example) to do the queueing. SVC 0 is used for task switching, but in my opinion I could use another SVC to do the queue up work. In this case the queueing would happen from isr environment, so the Queue_ISR functions could be used. Some adjustment must be made to the ported code, so that the SVC handler extracts the svc code, and depending on the svc number queues or switches tasks. Do you think this could work?

Regards,
Ákos Vandra


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS