IAR and STM3210E-EVAL / Stack?

I have been struggelig for a few days now, to get the STM3210E evaluation kit going with FreeRTOS. I have downloaded the contributed port: http://interactive.freertos.org/attachments/token/7ji4vw534mlvh1t/?name=FreeRTOS_STM3210E_EVAL_with_IAR_5_41_2.zip Trying to debug the port ends up in a “HardFault”. After disabling all the tasks except LEDFlash, things started working. LCD task can also be enabled, but enabling any more, results in a HardFault. Disabling LEDFlash and enabling CheckTask works well, but when both of them is enabled together with LCD, error occurs once again. I have tried to increase the stack and heap size in startup-file with no luck. Does anyone have any pointers to what i can try next?

IAR and STM3210E-EVAL / Stack?

I cannot support contributed code, but have provided the following list of “usual suspects” in point three of the following page: http://www.freertos.org/FAQHelp.html On an STM32, pay particular attention to the forth bullet point under point three, as unlike most CM3 vendor libraries, the STM32 libraries do not do this by default. Regards.

IAR and STM3210E-EVAL / Stack?

I tried with different versions of the IAR compiler and works correctly with 5.41 and 5.50,
while with 6.10 the port ends up in a “HardFault”.
Just have a little free time I try to investigate. Paolo

IAR and STM3210E-EVAL / Stack?

Hi, Update the demo for IAR 6.10 in FreeRTOS Intercative! I hope it is useful Paolo