Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


OpenOCD Help

Posted by Antonio Pessina on March 30, 2011
I'm trying to develop/debug a project using FreeRTOS 6.1.1 on a LuminaryMicro LM3S69565 evaluation board.
I use FreeRTOS6.1.1 + Eclipse Helios + CodeSourcery G++ Lite for Arm Ver. 4.5.1 + OpenOCD 0.4.0
I can build and link the .bin file but... I have problems to debug with the OpenOCD (programmer and server not working).
Any suggestion about the OpenOCD and the .cfg files to use?
I'm desperate.
Thank you

RE: OpenOCD Help

Posted by MEdwards on March 30, 2011
I think there is an OpenOCD mailing list or forum somewhere. That would be the best place to ask.

[ Back to the top ]    [ About FreeRTOS ]    [ Privacy ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.

Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.

View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.


FreeRTOS and other embedded software careers at AWS.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

Espressif ESP32

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers


STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS

Xilinx Microblaze and Zynq partner