Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


uip dhcp with gcc

Posted by Andreas W. on March 25, 2011
i try to use the CORTEX_LM3Sxxxx_Eclipse FreeRTOS example on a EK-LM3S6965-C-4 board.

But i use a self compiled gcc compiler

With a fixed IP i doesn't see any problems, but when i try to use dhcp, the board doesn't send the dhcp_discovery eth package.

the __attribute__ pack is in there by the -D PACK_STRUCT_END definition

the enet_uip compiled with my gcc from the ti stellaris sw_ek works.

Any ideas, how to initiate the sendout of the first dhcp_discovery package ?

RE: uip dhcp with gcc

Posted by Richard on March 27, 2011
Its not normally something I do myself as the simple examples just use a static IP address. However, I have seen FreeRTOS examples using DHCP. If you don't get a reply here I would suggest trying the uIP support mailing list.


[ Back to the top ]    [ About FreeRTOS ]    [ Privacy ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.

Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.

View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.


FreeRTOS and other embedded software careers at AWS.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

Espressif ESP32

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers


STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS

Xilinx Microblaze and Zynq partner