Hello, i try to debug a code (below) on Intel Galileo using JTAG Debugger Olimex ARM. It’s possible to execute only one part of ASM programme? How can i do that? Debugger don’t stop in breakpoints and don’t execute my code. Thank you in Advance. (I have only change the main.c file, please see attached) https://www.dropbox.com/s/l3w5qdnry3asatq/main_c.zip?dl=0 ~~~~ /* Add 10 and 20 and store result into register %eax */ asm volatile( “movl $10, %eax;” “movl $20, %ebx;” “addl %ebx, %eax;”);

        /* Subtract 20 from 10 and store result into register %eax */
        __asm__ __volatile__( "movl $10, %eax;"
                            "movl $20, %ebx;"
                            "subl %ebx, %eax;");

            /* Multiply 10 and 20 and store result into register %eax */
        __asm__ __volatile__( "movl $10, %eax;"
                            "movl $20, %ebx;"
                            "imull %ebx, %eax;");

~~~~

i try to debug a code (below) on Intel Galileo using JTAG Debugger Olimex ARM. It’s possible to execute only one part of ASM programme? How can i do that?

This is a tools question, not a FreeRTOS support question. You need to open the asm window in Eclipse, and then set the debugger to single step asm instructions – but you will need to see the Eclipse documentation rather than the FreeRTOS documentation on how to do that.

Debugger don’t stop in breakpoints and don’t execute my code.

? I assume I don’t understand what you mean here, as you can’t set break points in code that is not executing.