Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

Is anyone have difficulty with Lab 160112 on a ZC702

Posted by trob76 on March 17, 2016

I am finding the I cannot get a IP address from the DHCP server because I am not receive any packets.


Is anyone have difficulty with Lab 160112 on a ZC702

Posted by rtel on March 17, 2016

From this description it sounds like the fact you are not receiving packets is the issue, not DHCP.

The project has been tested on two different Zynq hardware platforms - ZC702 and MicroZed. Are you using one of these? If not, perhaps the PHY on your hardware is different and some changes are required to the init code?

How far have you got? Do you see packets leaving the device? When a packet arrives at the device, is an interrupt generated and does the MAC/Ethernet interrupt handler execute? If the Ethernet ISR does execute, is it finding the received packet correct, and is the packet sent into the TCP/IP stack correctly?


Is anyone have difficulty with Lab 160112 on a ZC702

Posted by rtel on March 17, 2016

Sorry - just noticed you already said ZC702 - this is the hardware I have myself. The other questions are still relevant though.


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS