Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

DHCP Malformed Packet

Posted by atemax on March 14, 2017

Hello, I run FreeRTOS+TCP Labs Build 150114 example and sniffing DHCP packet with wireshark I see many packet with [Malformed Packet], after few hours (lease time is 10 minutes for testing) the ip address of the board is set to default ip address. Someone have the some problem ? Thank you

Massimo


DHCP Malformed Packet

Posted by heinbali01 on March 16, 2017

Hi Massimo, you are using one of the oldest Labs releases (from January 2015). The current release is 160919.

I recommend that you upgrade your project to that version. You may also upgrade the kernel (to 9.0.0) but that isn't necessary.

But as I haven't seen malformed DHCP packets yet, could you attach a small PCAP file that shows some of those packets? You can filter DHCP packets with "udp.port==67"


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS