Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem



Posted by bachadamin on March 14, 2017

Hello Guys , I'm using freertos v9.0 with stm32f051, my question is "Do I need to configure the systick of my core or i just #define xPortSysTickHandler SysTick_Handler and it's gonna work without configuring thr systick ?"


Posted by rtel on March 14, 2017

If you are using STM32Cube then you probably need to do neither. Otherwise you don't need to configure SysTick yourself, but you do need to install the FreeRTOS SysTick handler. If your vector table names the SysTick hanlder SysTick_Handler then you are correct, #defining to that name in FreeRTOSConfig.h will work.

[ Back to the top ]    [ About FreeRTOS ]    [ Privacy ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.

Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.

View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.


FreeRTOS and other embedded software careers at AWS.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

Espressif ESP32

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers


STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS

Xilinx Microblaze and Zynq partner