Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


Loading

uIP and STR912x err: check status flags 0x10

Posted by josh r on May 14, 2007
I am trying to run the STR912x uIP demo on the STR910-EVAL board. It seems that I am never able to get past the ComPort initialization/test tasks. I get the error: "check status flags 0x10".

On UART2 the alphabet is transmitted in an infinite loop. What must I do to proceed?

Thanks,
Josh

RE: uIP and STR912x err: check status flags 0x10

Posted by Nobody/Anonymous on May 14, 2007
Unless there is anything different to the STR9 demos to any of the other demos, I would guess that you need a loop back connector on the com port. A paper clip usually does the trick. Just connect pins 2 and 3 together.

I also suggest you read the documentation page for the STR9 on the FreeRTOS WEB site.

RE: uIP and STR912x err: check status flags 0

Posted by josh r on May 14, 2007
:)... oops.


[ Back to the top ]    [ About FreeRTOS ]    [ Privacy ]    [ Sitemap ]    [ ]


Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

Version 10.1.0 of the FreeRTOS kernel is available for immediate download. MIT licensed.

View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.


Careers

FreeRTOS and other embedded software careers at AWS.



FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

Espressif ESP32

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

Renesas

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS

Xilinx Microblaze and Zynq partner