Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


CrossStudio Verify failed

Posted by Bob Marley on May 6, 2008

I'm using the Crossworks compiler and the "lwIP_Demo_Rowley_ARM7".
When I try to build the project the compiler don't find any errors, except at the end. Then I get the message: "Verify failed".

I'm using these components:
- Development board: Olimex SAM7-EX256
- CPU: Atmel AT91SAM7X256
- Latest freeRTOS version (v5.0.0)
- CrossStudio for ARM 1.7 build 3

I've changed the settings for the AT91SAM7S256 in the compiler to AT91SAM7X256

Can anyone help me with this?

RE: CrossStudio Verify failed

Posted by Dave on May 6, 2008
Is this a FreeRTOS problem? It just sounds like you cannot program the flash. Probably something to do with the .map file settings or the programmer configuration. Try programming the flash using the SAM-BA from Atmel (free download).

[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

Meet us at Embedded World. Hall 3A-525.

Hear from Richard Barry at Embedded World. Feb 28, 16:00, Hall 4-428.

Video: Watch James Gosling & Richard Barry at re:Invent, Las Vegas 2017.

FreeRTOS kernel V10.0.1 is available for immediate download. Now MIT licensed.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS