Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT


Crossworks on MCB1700 won't compile

Posted by George Redpath on May 29, 2012
I am using ARM Crossworks 2.2 and FreeRTOS 7.1.1 and trying to compile to a MCB1700 Keil target. After applying the notes on adding extra paths to the preprocessor it still fails to compile in the USB section, with messages that structures such as USB-> aren't defined. They do seem to have ben assigned in in LPC17xx.h.
Has anyone managed to build to this target, and if so have they any comments?

RE: Crossworks on MCB1700 won't compile

Posted by Dave on May 29, 2012
There is an example in the FreeRTOS download. Look in the \Demo\CORTEX_LPC1768_GCC_Rowley folder. It might not be for the MCB1700 exactly but it should build.

Are you actually using USB?

RE: Crossworks on MCB1700 won't compile

Posted by George Redpath on May 29, 2012
Thanks Dave, this is the example I am trying to build, and no at present I don't intend to use the uSB, but it isn't a promising start, I suspect I could remove the USB from the build, but I have a niggling fear, that if it won't compile after it seems to have been assigned, it is only the start of my problems.

[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS