Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

Cynal 8051 port

Posted by Nobody/Anonymous on November 8, 2004
Is the demo program for the Cynal F120 directly compatible with the F124? When I run the program nothing really seems to happen. I have placed break points in the tasks, but the program never seems to reach them. Some of the tasks are not created due to "errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY";
when I just create the "vErrorChecks" and "vRegisterCheck" tasks by themselves, the latter runs OK but the former runs intermitently. Is there something different I should do to make the demo run on the F124? Everything compiles OK and I am using the compilier suggested...

RE: Cynal 8051 port

Posted by Richard on November 9, 2004
I have never used the F124, but having just had a look on the Cygnal WEB site there does not seem to be much difference to the F120.

A couple of days ago I tried the latest snapshot of the compiler and this seemed to be fine also.

Are you using the reenterant libraries? These are available prebuilt from the FreeRTOS WEB if you require them. Without these (the default when you download the compiler) the scheduler will not operate correctly as the stack usage is completely different.


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS