Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

STR75x: only one task runs

Posted by Nobody/Anonymous on November 24, 2006
Hello everybody:

At the moment I try to change the demo application of FreeRtos and STR75x / IAR.

I write a new main file and create two task with diffenent prioritys.
Then I start the scheduler.

Both Task's were created sucessfully but only the task with the higher priority runs.

Have I overlocked something?



I also took the main file of the demo and delete all entries, exept the init and the
start scheduler, and added my create tasts. And again the same error.

Have anybody an idea or experience?

Thanks a lot!

RE: STR75x: only one task runs

Posted by Nobody/Anonymous on November 24, 2006
Does your high priority task ever block? The lower priority task will only run if the higher priority task cannot continue.

Try adding "vTaskDelay( 2 )" to the higher priority task. This will cause it to block for 2 ticks on each loop.

RE: STR75x: only one task runs

Posted by Nobody/Anonymous on November 30, 2006
Thanks it works!


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS