Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


Loading

FreeRTOS support for AT91SAM7X512

Posted by linux-ozzy on November 12, 2007
HI,

Is there any FreeRTOS port for the AT91SAM7X512 available ?
I've successfully running AT91SAM7X256 with arm-elf-gcc (GCC) 4.2.1 and FreeRTOS 4.6.1 and want to use AT91SAM7X512 as well.

Best Regards.
ozzy

RE: FreeRTOS support for AT91SAM7X512

Posted by Dave on November 12, 2007
All you need to do when moving from a x256 to an x512 is change the linker script to be correct for the larger ROM/RAM sizes. You can use the same port.

RE: FreeRTOS support for AT91SAM7X512

Posted by saiberion on November 12, 2007
There is no explicit port for the X512. But I think you can use the X256 code on an X512 nearly without any changes. The X512 differs to the X256 just in size of flash and ram, so adjust the ram size in the linker file properly to be sure.

As far as I know the chips of the SAM7 series are nearly identical. the biggest differences are between chips that have another letter before its number, e.g. the S-series only has one 32 PIO port wheres the X-series has 2 PIO ports and additional peripheral. Within a "lettered" series the chips differ in flash/rom/ram size.

RE: FreeRTOS support for AT91SAM7X512

Posted by linux-ozzy on November 22, 2007
Hello ....

Thanx for the help.
I successfully ported FreeRTOS for AT91SAM7X512. It is working very well.
Maybe it could be possible to add a demo application for AT91SAM7X512 to FreeRTOS source in the next release.

Best Regards.
ozzy



RE: FreeRTOS support for AT91SAM7X512

Posted by sara on November 30, 2007
Hi,
i am working in ARM926 processor.FreeRTOS is support STR91x(ARM966).Is there any FreeRTOS port for the my ARM processor available? or This ARM966 will support my processor?Is it support,what are the files needed for my processor to run it.I am waiting for reply.......


thanks in advance,
saravanan

RE: FreeRTOS support for AT91SAM7X512

Posted by Dave on November 30, 2007
> I am waiting for reply.......

I'm still waiting for a reply to the question "which ARM926 processor are you using". Without that answer no more information than has already been given in other replies exists. It has already been stated that the two should be compatible, so it is down to what other changes need to be made. Without you giving information on which device you are using we can only guess. Atmel, ST, TI, FPGA, which?

RE: FreeRTOS support for AT91SAM7X512

Posted by sara on November 30, 2007
Hello,
Thanks for your quick reply.I am using freescale ARM926EJ-S processor.Where Can i modify the codes of STR91x(ARM966E-S) for my processor.If you having any further information ask me.




regards,
saravanan

RE: FreeRTOS support for AT91SAM7X512

Posted by Allure99 on December 19, 2007
HI Ozzy,

mind to send your linker script for 512?
Thanks!


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10.0.1 is available for immediate download. Now MIT licensed.

Video: Watch James Gosling & Richard Barry at re:Invent, Las Vegas 2017.

New FAQ page about the FreeRTOS kernel and Amazon FreeRTOS.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS

Xilinx Microblaze and Zynq partner