Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


Trace Utility on HCS12 C32

Posted by Nobody/Anonymous on October 18, 2005

I am using this ports demo and would like to put in a trace for learning purposes. I have looked at the API help and read the article https://sourceforge.net/forum/message.php?msg_id=3323682, but I need a little more help.

Where would be a good place to declare the buffer and to start the trace (vTastStartTrace)? What type decleration is correct for the buffer?

I defined char cBuf[500]; in the local variables section of main.c and the call to vTastStartTrace in vApplicationIdleHook before the for(;;) loop.

However, at compile CodeWarrior claims there is no more RAM at location 0xFB9. I suspect this is due to the position of where I have declared the buffer.

Thanks and regards

RE: Trace Utility on HCS12 C32

Posted by Nobody/Anonymous on October 18, 2005
See other thread with same name.

[ Back to the top ]    [ About FreeRTOS ]    [ Privacy ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.

Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.

View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.


FreeRTOS and other embedded software careers at AWS.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

Espressif ESP32

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers


STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS

Xilinx Microblaze and Zynq partner