Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


AVR32 GCC default linker stack size

Posted by D F on October 27, 2009
Is the default stack that is defined by the linker script in-play after FreeRTOS starts? Or, can it be reduced to free up some RAM as it is 4K by default.?

RE: AVR32 GCC default linker stack size

Posted by MEdwards on October 27, 2009
Normally the stack set up in the linker script is only used before the scheduler is started, although in some ports it is also used by interrupt service routines. Don't know for sure on the AVR32 though, but in any case 4K would seem excessive.

RE: AVR32 GCC default linker stack size

Posted by D F on October 28, 2009
I reduced the default GCC stack to 1K by altering the linker script and it appears to be fine. It looks like the code executed by my program prior to starting the scheduler only uses about 352 bytes of stack max. This freed up 3K more RAM.

[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

Meet us at Embedded World. Hall 3A-525.

Hear from Richard Barry at Embedded World. Feb 28, 16:00, Hall 4-428.

Video: Watch James Gosling & Richard Barry at re:Invent, Las Vegas 2017.

FreeRTOS kernel V10.0.1 is available for immediate download. Now MIT licensed.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS