Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


Working CCS V5.5 project for MSP430X?

Posted by smithbone on October 29, 2013

Anyone have a working project using the latest CCS (V5.5) and a MSP430X device? The existing demo used a previous version of CCS.

Working CCS V5.5 project for MSP430X?

Posted by richardbarry on October 29, 2013

This has come up a few times before, but I can't see that there is any code in the Interactive site. You could try searching the archive: http://www.freertos.org/FreeRTOSSupportForumArchive/freertossupportforumarchive_index.html


Working CCS V5.5 project for MSP430X?

Posted by smithbone on October 30, 2013

Looking through the archives I see there have been some other issues with CCS 5.

This post indicates that 5.2 worked but had some problems with printf.


In that post you (Richard Barry) mention that you had not tried CCS 5 yet. I assume then that the demo project was for CCS 4? I wonder if I should try an earlier version of CCS?

[ Back to the top ]    [ About FreeRTOS ]    [ Privacy ]    [ Sitemap ]    [ ]

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS v10.2.0 is available for immediate download. MIT licensed, and including RISC-V and ARMv8-M (Cortex-M33) demos.

NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.

View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.


FreeRTOS and other embedded software careers at AWS.

FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

Cadence Tensilica Cortes

Espressif ESP32

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers





STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS

Xilinx Microblaze and Zynq partner