Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

LM3S6965 Eval RevC OLED did not work

Posted by Bill Yang on September 2, 2008
Hi, Is someone knows the LM3S6965 RevC Eval board has no display functionility since the board has switched to RevC? I used the LM3S6965 RevC Eval board to run the demo from FreeRTOS (LM3Sxxxx TCP/IP Keil version) and followed the instructions to replace the Osram128x64x4 with the rit128x96x4 in every where in the project. But OLED display is still not work. Does any one know how to fix this problem?
Bill Yang

RE: LM3S6965 Eval RevC OLED did not work

Posted by Richard on September 3, 2008
I presume you are able to step through the code in the debugger so know that the application is actually running.

I don't have a Rev C board here unfortunately. Can you run some of the Luminary demo code to check that the display works with their code, then see if they do anything different in the initialisation.

Regards.

RE: LM3S6965 Eval RevC OLED did not work

Posted by David Gesswein on September 3, 2008
I have the changes I made to make FreeRTOS 4.7.2 work on a rev C board on my FreeRTOS under Linux page. http://www.pdp8.net/other/freertos_linux/install.shtml
The changes needed in patch (context diff) format are http://www.pdp8.net/other/freertos_linux/rev_c_patch.txt
+ is lines added, - is lines deleted ! is lines changed.
The lines after *** #,# *** are the old file and lines and after --- #,# --- are the new file.

RE: LM3S6965 Eval RevC OLED did not work

Posted by Bill Yang on September 5, 2008
Thanks all, I figured out what is wrong with the OLED display. The revision of rit128x96x4.c file need to be updated to latest revision. After I updated the revision of rit128x96x4.c, it works. Thanks again.
Bill Yang

RE: LM3S6965 Eval RevC OLED did not work

Posted by Zhibin Zhang on September 18, 2008
Hi Barry,

For this build, can you give us some example on how you using uIP stack into your port?

Could you please briefly explain how you start, which file you have changed in order to use uIP....

It will help me a lot to learn how to use uIP and FreeRTOS. It will be a good example. How you modify some function in low level, how you integrate the drivers, and how you implement in the application level....



RE: LM3S6965 Eval RevC OLED did not work

Posted by Dave on September 18, 2008
There already is a full working example for uIP for the LM3S6965 in the FreeRTOS download.


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS