Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

ASF Builds for AT32UC3A0512

Posted by prunebutt on September 18, 2013

Hello! I want to run FreeRTOS on an Alvidi Board with a AVR 32bit UC3A0512 Chip. I'm using the Atmel studio 6 and was very happy that I found a FreeRTOS example project in the Atmel Software Framework (ASF). Unfortunately up until now only the FreeRTOS builds for UC3C and UC3L can be found in the ASF. Is there a way to convert the code to my AVR board or do I have to build it from scratch?

Thanks in advance!


ASF Builds for AT32UC3A0512

Posted by richardbarry on September 18, 2013

While I have been heavily involved with the ARM ports in ASF, Atmel maintain the UC3 stuff themselves and I am not particularly familiar with it. However, assuming the cores are the same between the different UC3 variants, the same code should be portable across all of them. In which case the following links might be useful:

http://www.freertos.org/Creating-a-new-FreeRTOS-project.html http://www.freertos.org/porting-a-freertos-demo-to-different-hardware.html

Regards.


ASF Builds for AT32UC3A0512

Posted by prunebutt on September 18, 2013

Thanks a lot for the links. I will try to modify the example project designed for another board but the same chip. Wish me luck. :D

Regards.


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS