Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem TCP & FAT




Loading

lpc2387 usb not working with freertos

Posted by Pravin Saini on September 13, 2013
Hi,

I have been trying to implement virtual com port using lpc2387. I started with lpc code bunlde for keil .It works fine there.
But,when I try to do the same with Free rtos had no success.I found that my usb isr is not getting called. I have tried writing ISR handlers as per the demo code but no success.

Thanks .

RE: lpc2387 usb not working with freertos

Posted by Richard on September 14, 2013
...in which case you may find the USB stack is the same one use as in this project. If so you can use it as a reference for your project as, although it is running on an LPC chip, it is a Cortex-M chip rather than an ARM7.

Hope that helps.

Regards.

lpc2387 usb not working with freertos

Posted by saini7pravin on September 20, 2013

Hi,

Can I have a freertos usb cdc demo for arm7 (lpc23xx) keiluv. thanks.


lpc2387 usb not working with freertos

Posted by richardbarry on September 20, 2013

You can convert the Cortex-M version to your chip, find one on the Internet, get one from NXP, .... or purchase a commercial USB stack (in which case you would require OpenRTOS rather than FreeRTOS).

Regards.


[ Back to the top ]    [ About FreeRTOS ]    [ Sitemap ]    [ ]




Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

FreeRTOS kernel V10 is available for immediate download. Now MIT licensed.


FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS